!["Clear Sight, Steady Shot Fighting the Mist in Your Footage for 2024"](https://www.lifewire.com/thmb/tbPESzzILzk9X04fO9qTcwgJkdY=/400x300/filters:no_upscale():max_bytes(150000):strip_icc()/android-fotoo-0a616886a0824ebcb610688c8eb5a667.jpg)
"Clear Sight, Steady Shot Fighting the Mist in Your Footage for 2024"
![](/images/site-logo.png)
Clear Sight, Steady Shot: Fighting the Mist in Your Footage
How to Avoid and Eliminate Fog on GoPro Lens/Housing
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Also read:
- 2024 Approved Audio Formatting Guide From SRT to XML/SSA, TTML, Etc
- Easy Steps to Obscure Identities in PiscArt
- 2024 Approved Beginner's Guide to Solo YouTube Broadcasting From Yourphone
- Prime Alternatives to GoPro Selecting the Ultimate Camera
- Best-Ranked 4K UHD Media Viewers Available at No Cost for 2024
- Strategic Utilization of Azure Voice-to-Text Capabilities
- [Updated] Comprehensive Solution for SRT Not Working in Premiere
- Acclaimed Cameras for Expert Automotive Tracking
- [Updated] Blur Borders for Visual Privacy
- Bidding Adieu with Elegance Sample Choices for 2024
- Visionaries of Virtuality Industry Breakthroughs
- [New] Crafting Compelling Movies Implementing Fade Techniques
- Vocal Variety Made Simple Utilize No-Cost Effects Enhancers
- Comprehensive Tutorial on GDoc's Voice-to-Text Feature for 2024
- In 2024, Capturing Impactful Voice Top Tips for Podcasting Interviews on iDevices
- [Updated] How to Create Meme with KineMaster
- [Updated] Best Look-Ups for GoPro Movies Select 15 LUTs
- Convert Talk to Text The Costless Alternative
- Avoiding Common Mistakes in MacOS Mixer Streaming
- Effervescent Emotions on IPhone
- [Updated] Bargain Cameras That Don't Skimp On Quality
- Apex GK Quizmasters' Video Channel List
- Quality and Cost Savings Unite in Best ASMR Mics
- Uncovering Non-Google AR Accessories and Tools
- In 2024, Crafting Perfect First Impressions on Any Device
- 10 Memetic Design Innovators' Choices
- Digital Personas Made Simple A Guide for the Curious VR Explorer
- How Many Movies Fit in 128GB Memory
- 2024 Approved Android's Ultimate Fix for Frustratingly Slow Vids
- Top 10 Facts on M1 Max Clips
- Unlocking the Full Potential of iPhone's HDR Capabilities
- Becoming a Professional Editor Mastering Final Cut Pro
- Android's Enhanced VR Video Viewing in the Modern Age for 2024
- Quick & Simple Creating Stunning Time-Lapses on Samsungs
- Mastering Audio Recording - Top Mics for 4K Video
- [Updated] Crafting Your Own Google VR Glasses
- Updated 2024 Approved Top Video Editing Software for PC GoPro Quik and More
- [New] In 2024, The Essential Tutorial for Altering Your Discord Display
- New VN Video Editor APK Download Is It the Best Video Editor for 2024
- How to Repair Broken video files of A2?
- New Exploring Audio Representation Displaying Sound Waves & Adding Animated Elements to Your Projects in Final Cut Pro for 2024
- Forgot Pattern Lock? Heres How You Can Unlock ZTE Blade A73 5G Pattern Lock Screen
- [Updated] In 2024, Unmissable Gameplay in Virtual Realms
- The Ultimate Vocal Evasion Software Catalog Essential Applications for Singers, Recording Studios, & Beyond for 2024
- 2024 Approved Insta Story Magic Embedding YouTube Links Like a Pro
- [New] Best TikTok Watermark Remover Apps for Android and iPhone
- [Updated] In 2024, Twitter Sharing Guide for TikTok Content
- [Updated] Elevate Engagement 4 Steps to Add FB Story Link for 2024
- In 2024, A Working Guide For Pachirisu Pokemon Go Map On Tecno Pova 5 | Dr.fone
- Updated 2024 Approved Revolutionizing Audio Capture on Android The 7 Best Alternatives to Audacity Revealed
- In 2024, How to Mirror Vivo Y200 to Mac? | Dr.fone
- [Updated] In 2024, Snapchat Screen Capture Tips for Phones
- [Updated] 2024 Approved Step-by-Step Guide to Optimizing FB In-Stream Advertising
- Top Strategies How To Remove Reverb From Audio With Precision for 2024
- 11 Best Location Changers for Vivo Y100i | Dr.fone
- How to identify missing drivers with Windows Device Manager on Windows 11/10/7
- In 2024, Ultimate Guide to iPadOS Screen Capture
- Minitool Movie Maker A Detailed Review, User Manual, and Alternative Solutions for 2024
- 2024 Approved Video Voyaging Navigating Twittersphere & Tumbleverse
- New 2024 Approved From Fast to Furious Add Slow Motion Effects to Your Videos for Free with Filmora
- List of Pokémon Go Joysticks On Asus ROG Phone 7 Ultimate | Dr.fone
- From Obscurity to Opulence Grow Your Insta Following to 1,000 for 2024
- Title: "Clear Sight, Steady Shot Fighting the Mist in Your Footage for 2024"
- Author: Paul
- Created at : 2024-05-24 11:02:16
- Updated at : 2024-05-25 11:02:16
- Link: https://extra-information.techidaily.com/clear-sight-steady-shot-fighting-the-mist-in-your-footage-for-2024/
- License: This work is licensed under CC BY-NC-SA 4.0.