!["[Updated] Clear Views Combating Fog in GoPro Photos"](https://www.lifewire.com/thmb/xSHtE9tL82nCUVR18o4SkLJaAw8=/400x300/filters:no_upscale():max_bytes(150000):strip_icc():format(webp)/GettyImages-962954554-5c338fc146e0fb0001346aec.jpg)
"[Updated] Clear Views Combating Fog in GoPro Photos"
![](/images/site-logo.png)
Clear Views: Combating Fog in GoPro Photos
How to Avoid and Eliminate Fog on GoPro Lens/Housing
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Also read:
- Mastering TikTok Bios Adding Linktree Seamlessly
- Streamlining Your Figma Project Eliminate the Unwanted Background
- Ultimate Insight 2024 Video Showcase Guidebook
- In 2024, Audience Allure Spinning Solo Podcasts That Go Viral
- In 2024, Advanced Techniques for Perfecting Your Voice with MorphVOX
- Advanced 3D Viewing on Your Android Device
- Best Action Cameras Outside the Realm of GoPro for 2024
- [New] 10 Sci-Fi VR Adventures Unveiling Distant Realities
- Revolutionary Chromatic Shots with UHD Blade Tech
- In 2024, Best Live Video Streaming Software
- Mastering Vector Art Our Picks for Top 10 Tools in Industry
- In 2024, Brief Blueprints IPhone Content for Desktop
- Understanding HDR Techniques in Modern Photoshoots
- 2024 Approved Bridging the Gap An Introduction to AV1
- Complete Breakdown Hero4 Black Functionality for 2024
- 2024 Approved 10 Must-Know iPhone Photography Tips Today
- [Updated] Advanced Speed Adjustment Techniques in Media Editing
- 2024 Approved Full Guide on Speeding Up Facebook Videos- Best Extensions, Apps, And
- 5 Best HD Hunting Recorders Reviewed
- [New] A Critical Look at SNS HDR's Potential & Alternatives
- Crafting a Cinematic Short Blending Images and Melodies for 2024
- Prime Locations for YouTube Content Exposure
- How To Change Your Phone's Ringtone Picking From Viral TikTok Sounds
- Accessories for Travel Footage Production for 2024
- [New] AllStream Worldwide Selective Local Channel Selection
- Conquer Color with Pro Techniques in Photography for 2024
- [New] Crafting Superior Recordings A Guide to Audacity
- Elevate Meeting Aesthetics How to Add Filters on Zoom
- Dynamic Title Creation The Game Changer
- Why Does Instagram Keep Flipping My Video?
- In 2024, Clickable Content Climber Software
- Audio Aesthetics in WhatsApp Updates
- Future Filming – Top 15 Video Cameras to Watch
- Framework for Utilizing Movies as Learning Tools
- Exquisite Online Destinations for Sparkling 3D Typography
- Survey Spectrum of Video and Film Equipment
- [New] Chuckle-Inducing Digital Artistry (Mobile Edition)
- [New] Budget-Savvy Shooters Top 5 Under $200 Cameras
- [Updated] Best Practices Snatching Supreme Photos for Free
- Chrome's PIP Magic for Seamless Video Playback
- Keep Your LinkedIn Videos at the Fingertips Top 6 Professional Downloader Apps
- 2024 Approved A Closer Look at Immersive Virtual Reality Tech
- Discovering New Dimensions Making Video From Photographic Slices with Pixiz
- InstaBeats Blending Music & Visuals Tactfully
- Discovering the Tech Marvel in Apple's M1 Max Clip
- The Complete Guide to Structuring Effective Audio XML
- How to Remove Signature Background in Seconds
- Picture Perfection PicArt Guide to Pristine Image Editing
- Microsoft’s Glimpse Into Augmented Reality – The HoloLens Journey
- 2024 Approved Auditory Interpretation Made Easy, Priceless Access
- In 2024, Unlocking the Power of Smart Lock A Beginners Guide for Vivo Y02T Users
- How Do You Remove Restricted Mode on iPhone 7
- [Updated] In 2024, From Live Streams to Recorded Content Navigating Aiseesoft's Features
- Full Guide How To Fix Connection Is Not Private on Vivo X Flip | Dr.fone
- In 2024, How I Transferred Messages from Tecno Camon 30 Pro 5G to iPhone 12/XS (Max) in Seconds | Dr.fone
- [Updated] In 2024, Tonal Terrain Mac Audio Artistry
- How to Repair Broken video files of Huawei P60 Art on Windows??
- [Updated] In 2024, Craft a Signature Sound How to Modify Voices for Instagram
- New 2024 Approved Windows Movie Maker for Mac Discover the Top 5 Alternatives
- 2024 Approved Breakdown The 10 Best Free Video Capturing Tools
- New In 2024, Top 10 Podcasting Audio to Text Transcription Software
- New 2024 Approved Leading Video Gamma Correction Software
- In 2024, Easy Guide How To Bypass Lava Yuva 2 FRP Android 10/11/12/13
- In 2024, How to Get and Use Pokemon Go Promo Codes On Samsung Galaxy A24 | Dr.fone
- [New] In 2024, Filing a Complaint with Finesse A Discord User's Guide to Reporting
- Navigating the World of GarageBand Audio with Ease A Detailed Guide
- [New] Crafting Concentration in Photos with Insta Zoom Tricks
- New The Complete Guide to MP3 Customization From Editing Basics to Professional Touches
- Elevate Your Video Storytelling on TikTok With 5 Key Caption Techniques
- [Updated] Extract Soundtrack of FB Events
- 2024 Approved How to Make My Photo 3D Cartoon Online
- Updated The Best Zero-Cost Video Editors for Cutting and Merging Videos for 2024
- Video Recording Decisions Optimal FPS – Is It 30 or 60 for 2024
- Title: "[Updated] Clear Views Combating Fog in GoPro Photos"
- Author: Paul
- Created at : 2024-05-24 11:45:18
- Updated at : 2024-05-25 11:45:18
- Link: https://extra-information.techidaily.com/updated-clear-views-combating-fog-in-gopro-photos/
- License: This work is licensed under CC BY-NC-SA 4.0.